Waterproofing and Damp-Proofing Specialists
Most leaks are not caused by a missing coat of sealant. They come from a membrane that has reached the end of its life, a flashing that has lifted, a box gutter that holds water, or a wall that draws moisture up from the ground. As waterproofing specialists, our first job on any building is to find out which of these is actually happening, because the right repair depends entirely on the cause.
NPC Painters & Renovators installs and repairs waterproofing and damp-proofing systems on homes, sectional-title complexes and commercial buildings. We are approved by several waterproofing manufacturers and work with products from Sika, a.b.e., Optima Coatings and BASF, choosing between polyurethane, bituminous, cementitious and acrylic systems for each surface rather than using one product everywhere.
Waterproofing services by part of the building
Every area of a building fails in its own way, so each needs its own preparation and product. These are the jobs our waterproofing contractors handle most often:
- Leak detection on existing systems, to locate the failure before anything is quoted
- Flat concrete roofs and roof terraces, from targeted repairs to full strip-and-replace
- Balconies over living space, garages and shops, including upstands and door thresholds
- Metal and tiled roofs, using seamless waterproof and heat-reflective coatings
- Flashings, box gutters and parapets, where many roof leaks actually start
- Rising damp and retaining walls, treating moisture coming through the ground
- Planters, flower boxes and water features, which hold water against the structure all year
Choosing the right waterproofing system
There is no single best product. The right system depends on the substrate, how much the surface moves, whether people will walk on it, how well it drains and what is already there. In broad terms:
- Polyurethane membranes are applied as a liquid and cure into a seamless, flexible layer, which suits balconies, terraces and roofs with lots of corners and penetrations.
- Bituminous (torch-on) membranes are a durable choice for larger flat concrete roofs, finished with a protective coating where they are exposed to the sun.
- Cementitious systems bond to masonry and concrete and are used on retaining walls, below-ground walls, water features and under tiles.
- Acrylic coatings are water-based, quick to apply and well suited to roofs with good falls that are recoated on a regular cycle.
Products from different systems are not always compatible, so we check what is on the roof before recommending an overlay or a full strip.
What a waterproofing contractor should check before quoting
A low quote that coats over a problem usually costs more within a few seasons. Whoever you appoint should be able to tell you:
- where the water is actually getting in, and how they established that
- whether the surface drains properly or holds ponding water that needs to be corrected first
- whether the existing membrane can be kept, repaired or overlaid, or has to be removed
- how upstands, outlets, flashings and joints will be detailed, since that is where most systems fail
- which product is specified, and whether the application follows the manufacturer’s requirements for a supplier-backed guarantee
WHY US?
Some great reasons to choose NPC Painters & Renovators for your next project
How we run waterproofing projects
A consultant visits, inspects the surface and any leak, and then prepares a written specification and quotation based on the supplier’s requirements. On larger projects the supplier or an independent consultant can compile the specification and inspect the work at agreed stages. Where the manufacturer’s specification is followed, we can facilitate product guarantees of up to 10 years. The owners stay involved in every project, our staff are police-cleared, and we are registered with the Building Industry Bargaining Council, FEM and the National Association of Managing Agents. You can see examples in our damp and waterproofing project gallery.
Areas we serve
We are based in Brackenfell and work across greater Cape Town, the Helderberg and the Winelands. For the problems typical of each area, see our pages on waterproofing across the Cape Town metro and on Bellville, Brackenfell, Durbanville, Edgemead, Goodwood, Kuils River, Panorama, Parow, Plattekloof, Somerset West, Strand, Gordon’s Bay, Sitari, Stellenbosch, Paarl, Franschhoek, Pearl Valley and Val de Vie.
If you have a leak, damp patch or a roof that is due for attention, call 021 981 0864 or use the quote form below to book a site visit.
RELATED SERVICES

Residential
Painting

Commercial Painting

Renovations & Alterations

Roof
Painting

Roofing & Roof Repairs
HOW IT WORKS
After a prospective client contacts NPC, we will set up an appointment with one of our consultants at a time that is convenient to the client.
The consultant will come out to your premises to conduct a thorough site inspection. This will also give you the opportunity to discuss any pertinent details with him.
A personalised specification and quotation will be drawn up and submitted to the client for their approval. All the specifications will be based on the relevant supplier requirements.
For large projects, we can request the client’s preferred paint supplier to compile a comprehensive specification.
Upon acceptance of the quotation, a proforma invoice will be sent to the client. Among various other details, it will indicate the deposit required before the project start date can be confirmed.
QUALITY CONTROL
For our clients’ peace of mind, NPC can request one of our suppliers or an independent consultant to do a site inspection and compile a site-specific specification that clearly indicates which products are most suitable for the project and the precise preparation procedures that should be followed.
Regular site inspections by the supplier or consultant and the client can then be scheduled at various stages of the project to ensure that all procedures and standards are being adhered to.
Did You Know?
We can bring our own non-potable water
FREQUENTLY ASKED QUESTIONS
What is the difference between waterproofing and damp-proofing?
Waterproofing stops water getting through a surface that is exposed to rain or standing water, such as a roof, balcony or planter. Damp-proofing deals with moisture moving through masonry, usually rising from the ground into walls or pushing through a retaining wall. The causes and products differ, so we confirm which problem you have before recommending a treatment.
How long does waterproofing last?
It depends on the system, how well it was installed and how it is maintained. When the manufacturer’s specification is followed, we can facilitate supplier-backed product guarantees of up to 10 years. Coatings exposed to strong sun and foot traffic need periodic inspection and recoating, and keeping outlets and gutters clear extends the life of any system.
Do you remove the old waterproofing before applying a new system?
Not always. If the existing membrane is still well bonded and compatible, it can sometimes be repaired or overlaid, which saves cost. Where it has blistered, lifted or trapped moisture, it has to be stripped so the new system bonds properly. We decide this on site and explain the reasoning in the written specification.
Can you find a leak before quoting on repairs?
Yes. Leak detection is usually the first step, because water often travels before it shows on a ceiling or wall. We locate the failure in the existing system, such as a lifted flashing, a cracked joint or a blocked outlet, so the quotation addresses the cause rather than just the symptom.
Get A Quote
"*" indicates required fields
